Mounting bracket LK-G5001PV Keyence
Mounting bracket LK-G5001PV Keyence

We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand UAE. The private labels and part numbers shown on this website are the property of their respective owners.

Keyence LK-G5001PV

Manufacturer

Keyence

Country

Japan

Name

LK-G5001PV

Type

Mounting bracket

Description

Controller

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications LK-G5001PV

On website of FAMAGA you can buy LK-G5001PV, and many other spare parts from the Keyence with delivery all over the United States , including: Ashburn.For price list, delivery timings and other product features of the Keyence, please, fill in the feedback form or send a description of goods you need to our e-mail [email protected]

Features LK-G5001PV

Main controller: Built-in type, PNP
Model LK-G5001PV*1*2
Separate type LK-G5001P/LK-HD500
Type Main controller
Sensor head compatibility Compatible
No. of connectable sensor heads 2
Display Minimum display unit LK-HD500: 0.001 µm
Display range LK-HD500: ±999.999 µm to ±9,999.99 mm (7 settings selectable)
Display cycle LK-HD500: Approx. 10 times/sec.
Display interface Display port Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected
LED indicator LASER ON
Terminal block Analogue output voltage ±10 V output, Output impedance: 100 ?
Analogue current output 4 to 20 mA, Maximum load resistance: 350 ?
No. of analogue outputs 2
TIMING 1 input Voltage input*3
RESET 1 input
Auto-zero 1 input
Laser control input Voltage input*4
Laser remote input Non-voltage input
Alarm output PNP open-collector output
General comparator output
Expansion connector TIMING input Voltage input
RESET input
Auto-zero input
Program switching input
Binary selection input
Alarm output PNP open-collector output
Comparator output
Binary output
RS-232C interface Baud rate: 9,600 to 115,200 bps Data length: 8 bits, Stop bit length: 1 bit, Parity: None/even/odd
USB interface USB 2.0 Hi-Speed compliant*5
Ethernet interface 100Base-TX/10Base-T*6
EtherNet/IPTMinterface Cyclic communication (implicit messaging) Message communication (explicit messaging) : UCMM and Class3 Number of connections: 32 Complies with conformance test version CT14*7
PLC-Link The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series EtherNet/IPTM, CC-Link, and DeviceNetTM cannot be used in conjunction with PLC-Link
Head expansion unit connector Up to 10 head expansion units can be connected to one main controller
Expansion unit connector Either of the CC-Link unit (LK-CC100) or DeviceNetTM unit (LK-DN100) can be connected
Power supply Power supply voltage 24 VDC ±10 %
Maximum current consumption 0.6 A or less with 1 head/3.5 A or less with 12 heads
Environmental resistance Ambient temperature When one or less head expansion unit is connected: 0 to +50 °C. When two or more head expansion units are connected: 0 to +40 °C.
Relative humidity 35 to 85 % RH (No condensation)
Weight Approx. 600 g
*1 PNP open-collector output rating: 50 mA max. (30 V max.), Residual voltage: 0.5 V max. Voltage input rating: Maximum input rating: 26.4 V, ON voltage: 10.2 V, OFF current: 0.6 mA *2 Part of the input/output circuit of the LK-G5000 Series is internally common. Be careful that no potential difference is generated between the internally common terminals due to the potential difference between the cables/external devices. For details, refer to 'Precautions on wiring' in the User's Manual. *3 This input is applied to all of the synchronized OUT. *4 When the laser class 3B sensor head is connected, a key-operated switch must be used for the input to this terminal. The laser is emitted only when the key-operated switch is set to the ON position. (Select a key which can be removed only when it is set to the OFF position.) When the laser class 1/2/3R sensor head is connected, the laser turns on when this terminal is opened and turns off when it is short-circuited. *5 When a PC supporting USB 1.1 or USB 2.0 full speed is connected, the data refresh cycle and other operations may slow down. *6 Use the Ethernet interface only for direct connections with a PC or for local network connections with a PC or LK-G5000 Series units. *7 The EtherNet/IPTM interface cannot be used when a CC-Link unit or a DeviceNetTM unit is installed. EtherNet/IPTM is supported by the latest controllers. For details on which controllers support EtherNet/IPTM , contact your nearest KEYENCE office.