Wenglor I08H025

• Easy sensor configuration using the IO-Link interface
• Innovative ASIC circuit technology
• Integrated error display and error output
• Minimal mounting clearance thanks to wenglor weproTec

The Inductive Sensors have not only been equipped with ASIC, but rather with an IO-Link interface as well for ideal integration into networks. As a result, a total of three switching distances and two switching frequencies can be selected, and PNP/NPN as well as NO/NC/antivalent options can be set as desired. This reduces the number of variants while simultaneously expanding the scope of functions.

Switching Distance	4 mm
Standard Target	12 ? 12 mm
Correction Factors Stainless Steel V2A/CuZn/Al	1,07/0,50/0,48
Mounting	semi-flush
Mounting A/B/C/D in mm	8/17/12/3
Mounting B1 in mm	0...6
Switching Hysteresis	< 10 %

Electrical Data

Supply Voltage	10...30 V DC
Supply Voltage with IO-Link	18...30 V DC
Current Consumption (Ub = 24 V)	< 12 mA
Switching Frequency	760 Hz
Temperature Drift	< 10 %
Temperature Range	-40...80 °C
Switching Output Voltage Drop	< 1 V
Switching Output/Switching Current	150 mA
Residual Current Switching Output	< 100 µA
Short Circuit Protection	yes
Reverse Polarity and Overload Protection	yes
Interface	IO-Link V1.1
Protection Class	III

Mechanical Data

Housing Material	CuZn, nickel-plated
Degree of Protection	IP67
Connection	M12 ? 1, 4-pin

Safety-relevant Data

MTTFd (EN ISO 13849-1)

3706,54 a

Function

Error Indicator	yes
Programmable switching distance	2,5/3/4 mm
Programmable switching frequency	yes

Output

IO-Link	yes
Switchable to NC/NO	yes
Configurable as PNP/NPN/Push-Pull	yes
Programmable error output	yes